Helpful Hints - Keurig Rivo Use And Care Manual

CARING FOR yO
USING yOUR SyStEM
Crafting an Iced Latte
STEP 1:
separate 3 oz. mug on the Beverage Platform
and prepare an Espresso Lungo (2.8 oz.) by
selecting the Espresso Lungo Button on the
Control Panel. Pour the espresso over the ice.
Important: Do not brew espresso directly into a glass cup filled
with ice. Doing so may cause the glass to crack or break.
STEP 2:
Frothing Pitcher (6 oz.) and place the Frothing
Lid on the Frothing Pitcher.
MAX FILL
Important: Add enough milk to fill to MIN FILL, but do not fill
beyond MAX FILL. Do not add ice, syrup or any other ingredients
to the milk prior to frothing. Doing so may damage the System.
STEP 3:
and press the Cold Froth Button.
If the Frothing Pitcher has not been positioned securely, you will hear
3 beeps when selecting a frothing mode. Remove the Frothing Pitcher
and re-insert, ensuring the Pitcher is securely in place.
STEP 4:
Frothing Pitcher from the System and carefully
remove the Lid. Pour the milk over the espresso
and enjoy!
Fill a cup with ice and set aside. Place a
Pour cold milk to MAX FILL of the
Return the sealed Pitcher to the System
When the milk is frothed, pull the
14
1 AUTOMATIC SHUT-OFF – As a safety feature, your System will automatically shut off
after it is idle for longer than 2 minutes. Just press the Power Button to restart.
2 EMPTy wATER RESERvOIR NOTIFICATION – If the Water Reservoir becomes
empty during brewing or frothing, the System will stop. the Control Panel will light up in
a circular pattern, flashing on the last mode used, and you will hear a series of beeps. If the
Water Reservoir is filled within 2 minutes, simply press the last used mode and continue
crafting your beverage. If more than 2 minutes have passed, the System will automatically
shut off. Press the Power Button and begin a new brew. you will need a new Rivo
3 FROTHING PITCHER NOTIFICATION – If the Frothing Pitcher has not been positioned
securely, you will hear 3 beeps when selecting a frothing mode. Remove the Frothing
Pitcher and re-insert, ensuring the Pitcher is securely in place.
4 THE RIGHT wATER – For the best tasting espresso, cappuccino or latte we recommend
using bottled or filtered water. We do not recommend using distilled or reverse osmosis water.
5 ICED BEvERAGES – Creating an iced latte or cappuccino is easy. Fill a cup with ice and
set aside. Brew espresso into a separate mug and pour the espresso over the ice. Use the
Cold Froth Button to froth milk and add the milk to the iced espresso. Important: Do not
brew espresso directly into a glass cup filled with ice. Doing so may cause the glass to crack
or break. Do not add ice, syrup or any other ingredients to the milk prior to frothing. Doing
so may damage the System.
6 THE DRIP TRAy AND RIvO™ PACK BIN – the Drip tray is designed to capture excess
liquid from the brewing process and will fill with liquid after 10 to 12 brews. the Drip tray
Indicator will become visible when the Drip tray is almost full. the Rivo
up to 12 used Rivo ™ packs. Empty both components by carefully removing them from the
System. Empty contents of the Drip tray into the sink and dispose of the used Rivo
Clean and dry both components before returning them to the System.
7 CLEAN yOUR SySTEM REGULARLy – to keep your System looking and performing
at its best, be sure to clean the external and internal components as indicated on page 16.
8 STORING – When storing your System, empty and dry all components. Store your System
upright in a safe, dry, frost-free environment.
hELPFUL hINtS
pack.
™
Pack Bin holds
™
packs.
™
15