Connecting A Personal Computer; Connecting An Amplifier/Av Receiver - Pioneer PDP-SX5080D Operating Instructions Manual

12 Using with other equipment

Connecting a personal computer

Use the PC terminals to connect a personal computer.
Note
• The PC input terminals are DDC2B-compatible.
Rear view
Stereo
mini jack cable
Displaying an image from a personal computer
To watch an image coming from the personal computer, press PC
on the remote control unit or press INPUT on the plasma television
to select "PC".
When connecting to a personal computer, the correct input signal
type is automatically detected. If the personal computer image does
not come in clearly, you may need to use Auto Setup menu. See
page 51.
Note
• The PC terminals cannot be used for audiovisual equipment.
60
En
Computer compatibility chart
Resolution
720 x 400
640 x 480 (VGA)
800 x 600 (SVGA)
1280 x 720
1024 x 768 (XGA)
1360 x 768 (Wide-XGA)
1280 x 1024 (SXGA)

Connecting an amplifier/AV receiver

You can enjoy more powerful sound by connecting such audio
equipment as an amplifier/AV receiver to the plasma television.
RGB cable
Rear view
Personal computer
• For details, refer to the operation manual for the audio
• Audio signals synchronizing with currently displayed images
• When signals are input from the HDMI terminals, no signals are
• While in DTV mode, no signals are output if they are copy
Stereo
audio cable
Note
equipment to be connected.
are always output to the AUDIO OUT terminals.
output from the DIGITAL OUT terminal.
guarded.
Frequency
70 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
Optical digital cable
Amplifier/AV receiver