Changing The Brightness At Both Sides Of The Screen; Blue Led Dimmer; Orbiter; Video Pattern - Pioneer PDP-SX5080D Operating Instructions Manual

11 Useful adjustment settings
Changing the brightness at both sides
of the screen (Side Mask)
With the 4:3, FULL 14:9, or CINEMA 14:9 screen size, you can
change the brightness of the grey side masks that appear at both
sides of the screen.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Side Mask" (/ then ENTER).
4 Select "Brightness Sync." (/).
5 Select the desired parameter (/).
Item Description
Fixed Always sets the same brightness for the grey side
(default) masks
Auto Adjusts the brightness of the grey side masks
according to the brightness of images
Important
• The "Auto" setting adjusts the brightness of the side masks
according to the brightness of the screen and can reduce the
possibility of image retention.
6 Press HOME MENU to exit the menu.

Blue LED Dimmer

You can adjust the brightness of the POWER ON indicator
depending on the brightness level of the viewing area.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Blue LED Dimmer" (/ then ENTER).
4 Select "High", "Mid" or "Low" (/ then ENTER).
5 Press HOME MENU to exit the menu.
54
En

Orbiter

This function automatically shifts the image little by little to reduce
the occurrence of the burning.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Orbiter" (/ then ENTER).
4 Select "On" (/ then ENTER).
5 Press HOME MENU to exit the menu.
• To cancel this function, select "Off" in step 4.
Note
• When the Orbiter function is set to "On", the image may appear
to drop slightly on the screen.
• This function does not operate when PC signals are received.

Video Pattern

You can display the Video Pattern screen that also helps eliminate
after-image when it occurs.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Video Pattern" (/ then ENTER).
A confirmation screen appears.
4 Select "Start" (ENTER).
The Video Pattern screen displays.
Note
• The system is automatically placed into standby one hour after
the Video Pattern screen has started.
• While the Video Pattern screen is on, no buttons operate except
a on the remote control unit, STANDBY/ON and a on the
plasma television.
• To cancel the Video Pattern screen, press a on the remote
control unit, STANDBY/ON or a on the plasma television.
• The Video Pattern timer has priority over the sleep timer. When
the Video Pattern timer is on, the sleep timer becomes
ineffective.