Table of Contents
Advertisement
Warning!
regularly.
Press the release latch (2) and pull the dust bowl (4)
straight off.
assembly (14) to empty the contents of the bowl.
To replace the dust bowl, place it back onto the handle
Warning!
I
15
11
11
for more thorough cleaning.
water.
ever worn or damaged.
dealer:
DV7210F
Maintenance
Your Black & Decker corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
switch off.
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
G
H
-
15
10
10
-
(Original instructions)
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environ-
mental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Battery
If you want to dispose of the product yourself, the
battery must be removed as described below and
disposed of in accordance with local regulations.
Preferably discharge the battery by operating the appli-
ance until the motor stops.
Press the release button (2) and remove the dust bowl (4).
Remove the seven screws holding the body of the appli-
ance together.
Lift the housing cover away from the assembly.
Detach all lead connections from the battery pack.
Remove battery pack.
Place the battery in a suitable packaging to ensure that
the terminals cannot be short-circuited.
Take the battery to your service agent or to a local recy-
cling station.
ENGLISH
7
Advertisement
Table of Contents
