Selecting The Operating Mode; Recording; Recording Videos - Silvercrest scaa 5.00 a1 User Manual And Service Information

SilverCrest SCAA 5.00 A1

Selecting the operating mode

Press the On/Off/Mode button [2] several times to toggle between the different operating
modes. The currently selected mode is indicated on the top-left corner of the display [1]. The
modes are cycled as follows:
Video mode
Setup

Recording

Recording videos


Press and hold the On/Off/Mode button [2] for at least 3 seconds to switch the
camcorder on. The camcorder initialises in Video mode automatically.

Press the record button [9] to start recording. During recording the status LEDs [3, 11
and 15] will flash red and the status LED [6] orange.

Press the record button [9] again to stop recording. The status LEDs [3, 11 and15] go
off.
244 - English
If the display is in dimmed power-saving mode, press the On/Off/Mode
button [2] once to toggle to active mode.
Photo mode
Self-timer
Burst mode
Time-lapse mode