Residual Heat - Electrolux EOB8851AA User Manual

6.4 Activating a heating function
1. Activate the appliance.
2.
Select the Heating Functions menu.
Press OK to confirm.
3. Set a heating function. Press OK to
confirm.
4.
Set the temperature. Press OK to
confirm.
Press to go directly to the Heat-
ing Functions menu. You can use
it when the appliance is activated.
6.5 Steam cooking
The water drawer cover is in the control
panel.
1. Press the cover to open the water
drawer.
2.
Fill the water drawer with 800 ml of
water.
The water supply is sufficient for ap-
proximately 50 minutes.
Do not put water directly into the
steam generator.
Use only water as the liquid. Do
not use filtered (demineralised) or
distilled water.
3. Activate the appliance.
4.
Set the steam heating function (refer
to the "Heating functions" table) and
the temperature.
5. If necessary, set the function Duration
or End Time
steam shows after approximately 2
minutes. An acoustic signal sounds
when the appliance is at approxi-
mately the set temperature. The sig-
nal sounds again at the end of the
cooking time.
6. Deactivate the appliance.
When the steam generator is
empty, an acoustic signal sounds.
When the appliance is cool, soak up all
remaining water from the steam generator
with the sponge. If necessary, clean the
steam generator with vinegar. Let the ap-
pliance dry fully with the door open.
6.6 Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold
onds. The heat-up indicator alternates.

Residual heat

When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
6.7 Energy saving
• Residual heat:
. The first
• Cooking with the lamp off - Touch
The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions (Duration, End, Time delay).
– When the appliance is off, you can
use the heat to keep food warm. The
display shows the remaining temper-
ature.
and hold for 3 seconds to deactivate
the lamp during cooking.
ENGLISH 13
for 3 sec-