Product View - Bissell POWERWASH DELUXE Manual

A

Product View

Do not plug in your cleaner until you have
completely assembled it per the following
instructions and are familiar with all instructions
and operating procedures.
1 Spray Trigger
2 Cleaning Tool
(tools vary by model)
3 Upper Handle
4 Power Cord
5 Carry Handle
6 Ready Tools™ Dial
7 Removable Nozzle
8 EdgeSweep™ Brushes
9 Belt Access Door
(underside of machine)
10 Cord Clip
11 Quick Release™ Cord Wrap
12 Hose
13 Tank Carry Handle
14 Tank Latch
Cleaning fluid
Keep plenty of genuine BISSELL 2X formula
on hand so you can clean and protect
whenever it fits your schedule. Always use
genuine BISSELL deep cleaning formulas.
Non-BISSELL cleaning solutions may harm
the machine and will void the guarantee.
To reduce the risk of fire and electric shock due
to internal component damage, use only BISSELL
cleaning fluids intended for use with the deep
cleaner.
B
Assembly
Your deep cleaner comes in four easy-to-
assemble components:
Upper Handle with Screws
Lower Base
Upper Hose/Cord Rack
Lower Hose/Cord Rack
The only tool you will need to assemble your
cleaner is a Phillips head screwdriver.
1. Slide upper handle onto lower base and
secure with two long screws into marked
holes (screws will be taped to upper handle).
2. Attach upper hose/cord rack to back of
the handle by guiding hook up into the slot
location and pressing firmly upward until it
is seated flush with back of machine. Secure
1 short screw through hole in the bottom of
upper hose/cord rack.
www.BISSELL.com
6
15 2-in-1 Water Tank
16 Power Pedal
17 Recline Pedal
18 1.5 L 2X Wash & Protect PRO Pro-
fessional Stain & Odour Formula
w/ Scotchgard™ Protector #1089E
19 1.5 L 2X Wash & Protect PET
Pet Stain & Odour Formula w/
Scotchgard™ Protector #1087E
20 1.5 L 2X Wash & Protect Stain &
Odour Formula w/ Scotchgard™
Protector #1086E
21 .5 L 2X Wash & Refresh Natural
Orange Formula #1146E
22 1 L 2X Hard Floor Solutions
3. Attach lower hose/cord rack by guiding
the hook up into slot location and pressing
firmly upward until it is seated flush with
back of machine. Secure 2 short screws
through holes on sides of the bottom hose/
cord rack.
4. Wrap hose around lower and upper hose/
cord racks and secure it by inserting trigger
on hose grip into opening on hose grip
holder located on upper hose/cord rack.
NOTE: Make sure to wrap hose beginning
from back of bottom hose/cord rack and
then wrapping over and around top of
upper hose/cord rack.
5. Wrap cord around lower and upper hose/
cord racks and secure plug to cord with clip
on plug.
6. Attach cleaning tools as necessary to
storage locations on bottom hose/cord warp
and end of hose grip.
Deep cleaner assembly is now complete.
C
Operations
C1 – Special features
Heatwave Technology™
This deep cleaner features Heatwave
Technology that helps to maintain the
temperature of the hand hot tap water you
put in it to provide constant heat as you clean.
The Heatwave Technology automatically turns
on when you turn the machine on.
C2 – Before you clean
1. Plan activities to give your carpet time
to dry.
2. Move furniture to another area if cleaning
an entire room (optional).
3. Vacuum area with a dry vacuum cleaner
before deep cleaning.
4. Plan your cleaning route to leave an
exit path. It is best to begin cleaning in the
corner farthest from your exit.
5. Pretreating (optional)
Pretreating is recommended to improve
cleaning effectiveness for heavily soiled
carpet in high traffic areas such as entry
ways and hallways.
To pretreat:
a. Using BISSELL Stain Pretreat (25)(sold
separately), generously spray evenly over
soiled area, do not overwet.
b. Wait 3-5 minutes before deep cleaning.
c. Clean as normal using your BISSELL
deep cleaner, following instructions in
this guide.