Audio Settings - Kenwood KDC-200UB Instruction Manual

CD / USB / iPod / ANDROID
Listen to TuneIn Radio/ TuneIn Radio Pro/
Aupeo
(for )
While listening to TuneIn Radio, TuneIn Radio Pro or
Aupeo, connect the iPod/iPhone to the USB input
terminal of the unit.
• The unit will output the sound from these
applications.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2 until the desired item is selected or
activated.
4 Press and hold to exit.
To return to the previous setting item, press
USB
MUSIC DRIVE DRIVE CHANGE: The next drive ([DRIVE 1]
to [DRIVE 5]) is selected automatically and
playback starts.
1
Repeat steps to
drives.
SKIP SEARCH 0.5%/ 1%/ 5%/ 10%: While listening to iPod
or ANDROID, selects the skip search ratio over
the total files.
10

AUDIO SETTINGS

While listening to any source...
1
2
3
4
1
2
To return to the previous setting item, press
SUB-W LEVEL* –15 to +15 (0)
.
BASS LEVEL
Default: XX
MID LEVEL
TRE LEVEL
EQ PRO (This setting is stored to [USER].)
BASS ADJUST BASS CTR FRQ
3
to select the following
MID ADJUST
(For )
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
(For other models)
Press AUD to enter [AUDIO CONTROL] directly.
Turn the volume knob to select an item (see the following table), then press the knob.
Repeat step 2 until the desired item is selected or activated.
Press and hold to exit.
(or using RC-406) (for
Press AUD to enter [AUDIO CONTROL].
Press J / K to select an item, then press
Adjusts the subwoofer output level.
–8 to +8 (+2)
Adjusts the level to memorize for each source. (Before making an adjustment,
–8 to +8 (+1)
select the source you want to adjust.)
–8 to +8 (+1)
60/ 80/ 100/ 200 or 60HZ/ 80HZ/ 100HZ/ 200HZ: Selects the center
frequency.
BASS LEVEL –8 to +8 (+2): Adjusts the level.
BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.
MID CTR FRQ 0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ: Selects the center frequency.
MID LEVEL –8 to +8 (+1): Adjusts the level.
MID Q FACTOR 0.75/ 1.00/ 1.25: Adjusts the quality factor.
)
.
.
Default: XX