Panasonic KX-HCM230 Operating Instructions Manual page 4

Operating Instructions
Network Parameters Table
An item for a parameter DDNS is newly added on the Network Parameters Table
on page 22 in the Operating Instructions. General modifications are added to the
asterisks and their descriptions for reference on the table including the one for
DDNS. DDNS parameter differs depending on your configuration type. Refer to
Operating Instructions for Network Camera Configuration Type.
Parameters
Port No.
IP address
Subnet
Mask
Set Default
Default
Gateway
Gateway
address.
DNS
Server 1, 2
DDNS
Max.
Bandwidth
Usage
* Many ISP's intentionally block the port number 80 to guard against network
1
viruses. If your ISP blocks the port number 80, substitute it to another unused
port number.
* When you use more than one Network Camera with a broadband router, each
2
Network Camera needs its own port number.
* The Port Forwarding (IP Masquerade) feature needs to be set to the
3
broadband router. Refer to page 32 in the Operating Instructions.
* Refer to the broadband router's manual.
4
4
Network Camera Configuration Type
[Type 1]
80 (default)
Check [Static], Check [Static],
and set the and set the
static private static private
IP address.
IP address.
Set the Subnet Mask fitted to your network.
Set the private
IP address of the
broadband router
(on your network),
not of the gateway
of your ISP.
Set DNS server address.
You do not
need to setup.
It can restrict the transmit bandwidth.
Select from 0.1 to Unlimited Mbit/s.
[Type 2]
* 1 * 3
80 (default) 80 (default)
* 2
Check [Static],
and set the
static global
* 4
IP address.
Set Default
Gateway
address.
* 4
Set DNS server
address.
* 6
[Type 3] [Type 4]
* 1
80 (default)
192.168.0.253
(default)
* 5
255.255.255.0
(default)
You do not
need to set up.
* 5
* 5
* 6 You do not
need to setup.