5
Installation and
connection
o n
l a t i
I n s t a l
Standard accessories
Check the washer dryer for
Note:
damage sustained in transit. Do not
switch on a damaged washer dryer. If
you have any complaints, contact the
dealer where you purchased the
appliance or our customer service.
~ Page 35
( Mains cable
0 Bag:
Installation and operating
■
instructions
Customer services location
■
directory*
Warranty*
■
Cover caps for openings after
■
the transport braces have
been removed
Adaptor with sealing washer
■
from 21 mm = ½" to 26.4 mm
= ¾" *
a n d
Installation and connection
8 Water supply hose on Aqua-Stop
models
@ Water drain hose
H Elbow for securing the water
o n
c o n n e c t i
drain hose*
P Water supply hose on standard/
Aqua-Secure models
*
depending on the model
Note:
A hose clip Ø 24–40 mm (specialist
store) is also required for connection
to a siphon.
Connecting the water ~ Page 40
Useful tools:
Spirit level for alignment ~ Page 42
■
Size 13 socket wrench:
■
for loosening the transportation
protection devices ~ Page 39
and size 17: for aligning the
appliance feet ~ Page 42
Installation
Humidity in the drum is caused
Note:
by the final inspection.
Secure installation
:
Warning
Risk of injury!
The washer dryer is heavy. Take
■
care when lifting it.
When lifting the washer dryer by its
■
projecting parts (e.g. washer dryer
door), the parts may break off and
cause injuries.
Do not lift the washer dryer by its
projecting parts.
If the hoses and power cables are
■
installed incorrectly, there is a risk of
stumbling and injury.
Lay hoses and cables in such a way
that there is no risk of stumbling.
en
37