Advertisement
1
Power Tilt and Telescoping
Steering Column*
Use the 4-way control to adjust the steering wheel to your desired position.
2
Electric Parking Brake
The operating switch
replaces the conventional handbrake. It is to the
left of the steering column. To use, pull the switch up. The brake system
warning lamp lights to confirm that you applied the electric parking brake.
4
To release the electric parking brake manually, switch the ignition on, press
the brake pedal and then press the electric parking brake switch down.
Your vehicle can automatically release the electric parking brake after
you close the driver door and accelerate, and the system does not detect
any faults. If the electric parking brake warning lamp remains lit, you must
release the electric parking brake manually. Refer to the Brakes chapter of
your Owner's Manual for more information.
*if equipped
Instrument Panel
3
Information Display
Provide information about various systems
Putting Your Vehicle in Gear
on your vehicle. Use the left, 5-way controls
A. Fully press down on the brake pedal,
located on the steering wheel to choose and
then press and release one of the PRNDS
confirm settings and messages. Refer to the
controls to select your gear.
Information Displays chapter in your Owner's
B. The selected gearshift control lights and the
Manual for more information.
information display shows the selected gear.
4
Release the brake pedal and your
Service Engine Soon Light
transmission remains in the selected gear.
Illuminates briefly when you switch the
ignition on. If it remains on or blinks after you
Note: When entering an automatic car wash,
start the engine, the On-Board Diagnostics
always put your vehicle into Stay in Neutral
(OBD-II) system has detected a problem.
mode. To put your vehicle in Stay in Neutral
Drive in a moderate fashion and contact your
mode, make sure your vehicle is stationary first,
authorized dealer as soon as possible.
and then:
5
Steering Wheel Audio and Media Controls
A. Press the neutral (N) control on the shifter
assembly once. The information display
Press VOL + or – to increase or decrease
screen reads "Press N Again to Enter Stay
volume levels.
in Neutral mode".
⊳
⊲
|
|
Press SEEK
or
to access the next or
B. Press neutral (N) on the shifter assembly
previous radio station preset, CD track or preset
again. The message "Stay in Neutral
satellite radio channel.
mode engaged" appears in the information
Press
to access SYNC® phone features.
display and the neutral (N) control flashes
continuously to confirm your selection.
Press
to access voice recognition.
6
To exit Stay in Neutral mode, fully press down
Push Button Shift Transmission
on the brake pedal, then press and release
Your vehicle includes an electronic transmission.
another gear. Release the brake pedal and your
The shift controls are on the center stack.
transmission remains in the selected gear.
2 0 1 6 M K X
7
Push Button Start
Allows you to start your vehicle by pressing the
START STOP button while fully pressing down
on the brake pedal. Press the button again to
switch the engine off.
Note:
Your intelligent access transmitter must be
inside the vehicle for keyless starting to work. If you
exit the vehicle with the transmitter and the vehicle is
running, the horn sounds.
8
Parking Aid Features
See pages 16 and 17 for more information.
9
Hazard Warning Control
10
AutoHold
See page 15 for more information.
11
Locking Glove Box
See page 12 for more information.
5
Hide quick links:
Advertisement
