Instrument Panel - Lincoln MKZ HYBRID 2016 Quick Reference Manual

Hide thumbs Also See for MKZ HYBRID 2016:
Table of Contents

Advertisement

1
Press
Steering Wheel Audio and Media Controls*
end a call.
Press VOL + or – to increase or decrease
Press
volume levels.
2
|
Press
or
|
to access the next or previous
Power Tilt and Telescoping
radio station preset, CD track or preset satellite
Steering Column*
radio channel*.
The 4-way control allows you to adjust the
steering wheel to your desired position.
Press
to answer an incoming call.
4
3
and hold to exit phone mode or
Adaptive Cruise Control*
In addition to cruise control, your vehicle may
to access voice recognition.
also include adaptive cruise control. The system
adjusts your speed to maintain a set distance
between your vehicle and the vehicle in front of
you in the same lane. You can select one of four
gap settings by pressing the and controls on
the steering wheel.

Instrument Panel

Note: Driving aids do not replace the need to
watch where the vehicle is moving and brake
where necessary. Refer to the Cruise Control
chapter of your Owner's Manual for safety
information, more details and limitations.
4
Left Vehicle Info Display
Use the steering wheel controls to navigate to
various screens.
The Display/Trip Mode provides hybrid-specific
information through the following screens:
° Engage
° Empower
° MyView
° Trip
MyView lets you choose what information you
wish to display. Select Change MyView in the
Options menu to scroll through the content and
make your selections.
Brake Coach appears after the vehicle
comes to a stop. It coaches you to maximize
the amount of energy that can be returned
through the regenerative braking system.
The displayed percentage indicates your
braking efficiency, with 100% representing the
maximum amount of energy recovery. You
can switch this feature ON and OFF in the
information display.
*if equipped
*if equipped
5
8
Service Engine Soon Light
Push Button Shift Transmission
Lights briefly when you switch on the
Your vehicle is equipped with an electronic
ignition. If it remains on or is blinking after you
transmission. The shift buttons are on the
start the engine, the On-Board Diagnostics
instrument panel, next to the MyLincoln
(OBD-II) system has detected a problem. Drive
Touch system.
in a moderate fashion and contact your
Putting your vehicle in gear:
authorized dealer as soon as possible.
6
A. Fully press down the brake pedal.
Right Vehicle Info Display
B. Press and release one of the PRNDL
Use the steering wheel controls to access a
buttons to select your gear.
variety of features:
C. The gear shift button you select then lights
Fuel Economy provides ways you can monitor
and the instrument cluster shows the
your energy use:
selected gear.
° Efficiency Leaves and Flowers
D. Release the brake pedal and your
° Fuel History
transmission remains in the selected gear.
° Coach
Note: When entering an automatic car
Entertainment, Phone and Navigation*
wash, always put your vehicle into
information is also available. Refer to the
Stay in Neutral mode:
MyLincoln Touch
chapter in your Owner's
TM
Manual for more information.
A. Press the neutral (N) button once. The
7
information display reads "Press N Again
Push Button Start
to Enter Stay in Neutral mode".
Allows you to start your vehicle by pressing the
START STOP button while fully pressing down
B. Press the neutral (N) button again. The
on the brake pedal. Press the button again to
message "Stay in Neutral mode engaged"
switch off the engine.
appears in the information display and the
neutral (N) button flashes continuously to
Note: Your intelligent access transmitter must
confirm your selection.
be inside the vehicle for the vehicle to start.
Keyless warning alert sounds the horn twice
To exit Stay in Neutral mode, press
when you exit the vehicle with the intelligent
another gear.
access transmitter and the keyless vehicle is in
RUN, indicating the vehicle is still on.
2 01 6 M K Z H Y B R I D
5

Advertisement

Table of Contents
loading

Table of Contents