Using Additional Microphones - Phonak Roger Table Mic User Manual

Indicator light (Connection status)
After pressing the Connect
feedback may be given by the indicator light:
Indicator light Meaning
Connection was successful - the other
Roger microphone is now connected to
Roger Table Mic.
Roger Table Mic could not find another
Roger microphone. Move Roger Table Mic
closer to the other Roger microphone and
make sure both microphones are
switched on. Then try Connect again.
The other Roger microphone is not
compatible with Roger Table Mic. Please
do a software update using Roger
Upgrader or contact your hearing care
professional.
24
button, the following

5.2 Using additional microphones

Additional Roger Table Mics are placed so that you can
hear the people seated around the table. Hand over any
wearable Roger microphones to your speakers. Make sure
they are worn properly (pointing to the mouth and within
20 cm / 8 inches).
The Roger microphones automatically detect when
someone talks, before instantly transmitting the voice to
your hearing aids.
If a speaker wearing a microphone wants to temporarily
leave the group, they should mute their microphone by
firmly pressing the on/off button.
25