Usb-Cabling Of The I3Touch; Connecting The Display (Vga/Hdmi/Dvi/Dp) - i3TOUCH V-SENSE 8404 4K T10 User Manual

6 USB-cabling of the i3TOUCH

Normally a computer and a i3TOUCH will communicate without any troubles if only the
delivered USB-cable is used. In some seldom cases however other cabling is necessary
because of insufficient power (see step 5) or because the PC is located away from the display.
Check if your installation setting matches with the below image. The active USB extender
cables (RED) are only used when cables need to be prolonged. The USB hub (GREEN) is only
used when the i3TOUCH is not getting sufficient power. See step 5.

7 Connecting the display (VGA/HDMI/DVI/DP)

Connect your computer with your display. If necessary, duplicate the image. The keycombination
to be used to extend your image depends on your computer brand. E.g. Dellcomputers:
FN+F5
41