Hitachi FP-Z31 Operation Manual page 22

(Note)
While the title screen has been selected,
AUTO CENT/AUTO SETUP switches will not execute their prescribed functions even when set. The AUTO
WHT switch, however, functions to clear the title memory.
(Note)
When the DISP/WR ITE switch
made to the initial warning display screen (the screen which is normally used).
6.3.4 Auto white setting
The white balance is set in order to obtain well balanced color pictures. Set the GA IN mode switch
([D
PRESET/AUTO
screen, and then set the AUTO WHT /AUTO B LK switch@ to the top position.
(1) The display messages below appear when the automatic white balance has been set properly.
Message displayed until bal­
ance has been set
(2) The following messages are displayed
j :
h�ve not been set appropriately:
L
I·
This blinks--+---(. : ::; c.
I
When the color temperature
is too low
Set the color temperature compensation filter properly and reset the AUTO WHT / AUTO B LK switch
to the top position again.
?()
AUTO WHT / AUTO B LK, GAi N 0/9/18 dB, BAR/CAM and
the.
� is set to the top position again in the title screen mode, a return is
to the AUTO position, shoot a white object so that it fills more than 10% of the
This blinks
I
r AUTO WHITE ::/
w_ h en the color temperature of the lighting and the filter disc
This blinks
AUTO WHITE : ��� )
TEMP. Low
CHANGE CC Fil TEA
TAY AGAIN
This is
sec.
5
r
AUTO WHITE: COMPLETED
Message displayed when the
balance has been properly set
This bl inks.
AUTO WHITE : :'NG·:
·:::: C. TEMP. HI
CHANGE CC FILTER
This blinks
TAY AGAIN
When the color temperature
is too high
disp1h· h d for about
@
(3) W
T
WI
is
(Note
Care s
they a
(4) T
Th
Wh
( 5) 1
A
Tt
w
h�