Translation Of The Original Ec Declaration Of Conformity - Parkside PTBM 500 A1 Translation Of Original Operation Manual

GB
We hereby confirm that the
Bench Drill
Design Series PTBM 500 A1
Serial Number
201408000001 - 201411056900
conforms with the following applicable relevant version of the EU guidelines :
2006/42/EC • 2004/108/EC • 2006/95/EC • 2011/65/EU*
In order to guarantee consistency, the following harmonised standards as well as national
standards and stipulations have been applied:
EN 55014-1:2006+A2:2011 • EN 55014-2:1997+A2:2008
EN 61000-3-2:2006+A2:2009 • EN 61000-3-3:2013
This declaration of conformity (14)** is issued under the sole responsibility of the
manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
06.11.2014
*The object of the declaration described above satisfies the provisions of Directive 2011/65/EU
of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful
substances in electrical and electronic appliances.
**The last two digits of the year in which the CE marking was affixed.
Translation of the original EC
EN 61029-1:2009+A11:2010
declaration of conformity
Volker Lappas
Documentation Representative
113