Hide thumbs Also See for 8507:

Advertisement

ORDERING REPLACEMENT PARTS

To order replacement parts, contact the ICON Fitness Lifestyle Ltd. office, or write:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
West Yorkshire
Leeds LS7 2AA
Tel: Country Code: 0345-089009
Fax: 113-241-1120
Please provide the following information when ordering replacement parts:
1. The MODEL NUMBER of the product (WESY87080).
2. The NAME of the product (WEIDER
®
8507 Training System).
3. The SERIAL NUMBER of the product (see the front cover of this manual).
4. The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 20 of this manual).
Part No. 146041 R0498A WEIDER is a registered trademark of ICON Health & Fitness, Inc. © 1998 Printed in Canada
Patent Pending
Model No. WESY87080
Serial No.
Write the serial number in the space
above for future reference.
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or find that there
are missing or damaged parts,
we will guarantee you complete
satisfaction through our
Customer Service Department.
Please CALL:
0345-089009
Or WRITE:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
West Yorkshire
Leeds LS7 2AA
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
CLASS H C Fitness Product
USER'S MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Weider 8507

  • Page 1: Ordering Replacement Parts

    Read all precautions and instruc- tions in this manual before using this equipment. Save this manual USER'S MANUAL for future reference. Part No. 146041 R0498A WEIDER is a registered trademark of ICON Health & Fitness, Inc. © 1998 Printed in Canada...
  • Page 2 TABLE OF CONTENTS NOTES IMPORTANT PRECAUTIONS ............. .2 BEFORE YOU BEGIN .
  • Page 3: Before You Begin

    WESY87080. The serial number can be found on a and strength, or improve your cardiovascular system, decal attached to the WEIDER 8507 (see the front the WEIDER 8507 will help you to achieve the specific cover of this manual). results you want.
  • Page 4: Assembly

    ASSEMBLY EXPLODED DRAWING—Model No. WESY87080 R0498A Assembly requires two people. Due to the size • Tighten all parts as you attach them, unless and weight of the home gym system, assemble it in instructed to do otherwise. the location where it will be used. 68 81 THE FOLLOWING TOOLS (NOT INCLUDED) ARE 27 67...
  • Page 5: Adjustment

    3. Slide six Weights (25) onto the Weight Guides (72). PART LIST—Model No. WESY87080 R0498A Be sure that all of the Weights are turned so the pin grooves are on the indicated side. Key No. Qty. Description Key No. Qty. Description 5/16”...
  • Page 6: Trouble-Shooting And Maintenance

    5. Press the Weight Tube Bumper (79) into the end of TROUBLE-SHOOTING AND MAINTENANCE the Weight Tube (80). Slide the Top Weight (77) onto the Weight Tube. Be sure that the pins on the Weight Tube are resting in the pin grooves under Inspect and tighten all parts each time you use the home gym system.
  • Page 7 ATTACHING THE LAT BAR OR NYLON STRAP TO 8. Attach the upper ends of the Weight Guides (72) to THE LOW PULLEY STATION the Top Frame (67) with the 5/16” x 6” Bolt (74), two 1/2” x 3/4” Spacers (73), and a 5/16” Nylon Locknut Attach the Lat Bar (85) to the Short Cable (23) with a (3).
  • Page 8 11. Press a 1 3/4” Square Inner Cap (44) into each end ATTACHING AND REMOVING THE SEAT of an Arm (46). Set the bracket on the Seat Frame (36) on the indicated Apply lubricant to the lower axles on the Arm Frame pin on the Front Upright (42).
  • Page 9: Cable Diagrams

    14. Attach a Large “U” Bracket (56) to one of the Arms ADJUSTMENT (46) with a 3/8” x 2 3/4” Bolt (70), 3/8” Flat Washer (9), and 3/8” Nylon Locknut (21). Be sure that the Swivel Bracket (58) is on the inside as shown. The instructions below describe how each part of the home gym system can be adjusted.
  • Page 10 16. Remove the 3/8” x 1 3/4” Bolt (48), 3/8” Nylon Jam 29. Slide a Handgrip (12) onto each end of the Lat Nut (5), and 3 1/2” Pulley (15) from the indicated Bar (85). bracket on the Top Frame (67). Insert the end of the Long Cable (66) through the bracket and down Hole through the indicated hole.
  • Page 11 26. Press a 1 1/2” Square Inner Cap (32) into the Leg 19. Note: The 3 1/2” Pulley (15) shown in this step Lever (29). is pre-attached to the Adjustment “U” Bracket (75). Attach the 5/16” x 2” Eyebolt (62) to the Leg Lever (29) with a 5/16”...
  • Page 12 21. Attach the 5/16” x 3” Bolt (17), two 5/16” Flat 23. Attach the 5/16” x 3 1/2” Bolt (87), two 5/16” Flat Washers (8), and a 5/16” Nylon Jam Nut (2) to the Washers (8), the 1” Metal Spacer (22), and a 5/16” indicated hole in the Top Frame (67).
  • Page 13 REMOVE THIS PART IDENTIFICATION CHART FROM THE MANUAL 3/4" Round Inner Cap (34) 1" Round Inner Cap (49) 1" Round Cover Cap (55) This chart is provided to help you identify the small parts used in assembly. Important: Some parts may have been pre-assembled for shipping purposes.
  • Page 14 1/4" Nylon Locknut (7) 1/4" x 1/2" Screw (31) 1/4" x 3/4" Screw (18) 5/16" x 2 1/2" Carriage Bolt (1) 1/2" x 3/8" Spacer (51) 1/4" Nylon Jam Nut (86) 5/16" x 2 3/4" Carriage Bolt (14) 1/4" x 2 1/2" Screw (43) 1/2"...

Table of Contents