Safety Instructions - Zanussi ZSG20100 User Manual

The contents of feeding bottles and baby food jars shall be
•
stirred or shaken and the temperature checked before
consumption, in order to avoid burns.
Eggs in their shell and whole hard-boiled eggs should not be
•
heated in the appliance since they may explode, even after
microwave heating has ended.
The appliance should be cleaned regularly and any food
•
deposits removed.
Failure to maintain the appliance in a clean condition could lead
•
to deterioration of the surface that could adversely affect the life
of the appliance and possibly result in a hazardous situation.
The temperature of accessible surfaces may be high when the
•
appliance is operating.
The microwave oven shall not be placed in a cabinet unless it
•
has been tested in a cabinet.
The rear surface of appliances shall be placed against a wall.
•
Do not use harsh abrasive cleaners or sharp metal scrapers to
•
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
Pay attention to the minimum dimensions of the cabinet (if
•
applicable). Refer to the installation chapter.
The appliance must be operated with the decorative door open
•
(if applicable).

Safety instructions

Installation
WARNING!
Only a qualified person must install
this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied
with the appliance.
• Always be careful when you move the
appliance because it is heavy. Always wear
safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the other
appliances and units.
• Make sure that the appliance is installed
below and adjacent safe structures.
www.zanussi.com
• The sides of the appliance must stay
adjacent to appliances or to units with the
same height.
Electrical Connection
WARNING!
Risk of fire and electrical shock.
• All electrical connections should be made by
a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information on
the rating plate agrees with the power
supply. If not, contact an electrician.
• If the appliance is connected to the socket
via an extension cord, make sure the cord is
earthed.
17