Quick Release Wheels - Quickie Neon 2 Instructions For Use Manual

5.0 Quick Release Wheels

Quick-release axles on rear wheel
The rear wheels are equipped with quick-release axles. The wheels can
thus be installed or removed without using tools. To remove a wheel, simply
depress the quick-release button on the axle and pull the wheel off the axle.
(Fig. 5.1).
Quick release for quads/tetraplegics
Please flip up the release lever (1). The take out the quick release axles and/
or the wheels.
When the wheels/quick release axles have been put on the chair again, plea-
se flip the release lever down.
Please do always ensure that the release mechanism is closed and fully
locked before starting to use the wheel chair (Fig. 5.2).
WARNING!
• Hold the quick-release button on the axle depressed when inserting
the axle into the frame to mount the rear wheels. Release the button to
lock the axle in place. The quick-release button should snap back to its
original position.
• Risk of injury. Do not get your fingers caught in the rotating wheel.
Always stop wheel rotation before removing the wheels.
NEON 2 SA
17
Fig. 5.1
Fig. 5.2
1
Rev.1.0