Table of Contents
Advertisement
Critical Points
If [Wireless Network Connection 2 Properties] is not displayed, click [Start] → [Settings] →
[Control Panel], and double-click the [Network Connection] icon.
Right click the [Wireless Network Connection], and then click [Properties] from the menu
that appears.
2
Perform the following steps.
•
Click [Internet Protocol (TCP/IP)].
•
Click [Properties]. [Internet Protocol (TCP/IP) Properties] appears.
3-4 Set an IP address. Ask your network administrator and check the setting.
Item
Description
AdHoc
Set the IP address and subnet mask. Click [Use the following IP address].
Network
Enter a value for [IP address] and [Subnet mask].
For
Select [Obtain an IP address automatically]. For the DNS server, select
Infrastructure
[Obtain DNS server address automatically]. For the IP address, DNS server,
Network
and default gateway, follow the network administrator's instructions, if any.
Table 13: Setting an IP address
5
Click [OK].
Critical Points
If you have changed the setting, [Close] is shown...
Checking the Full Computer Name and Workgroup
Click [Start] → [Control Panel]. Make sure the Classic View is selected.
1
2
Double-click the [System] icon. [System Properties] appears.
3
Click the [Computer Name] tab.
4
Check [Full computer name] and [Workgroup]. Ask your network administrator and check
the setting.
44
Advertisement
Table of Contents
