Table of Contents
Advertisement
Network Connection
The section describes how to set the network connection for a computer with Windows 2000.
Network Settings
In this section, you set "TCP/IP Settings," and complete
1
Double-click the [Network and Dial-up Connections] icon. The [Network and Dial-up
Connections] window appears.
2
Right click the [Local Area Connection], then click [Properties] from the menu that appears.
The [Local Area Connection Properties] window appears.
Critical Points
IMore than one network adapter is installed in your system if more than one [Local Area
Connection] entry is displayed. In this case, select the [Local Area Connection] entry with
[Intersil PRISM Wireless LAN PCI Card] displayed under [Device Name].
3
Perform the following steps.
•
Click [Internet Protocol (TCP/IP)].
•
Click [Properties]. The [Internet Protocol (TCP/IP) Properties] window appears.
4
Set an IP address as indicated in Table 7. Ask your network administrator to check the
setting.
Item
Description
For AdHoc
Set the IP address and subnet mask:
Network
Click [Use the following IP address], and enter a value for [IP address] and
[Subnet mask].
Select [Obtain an IP address automatically]:
For
Infrastructure
For the DNS server, select [Obtain DNS server address automatically].
Network
For the IP address, DNS server, and default gateway, follow the network
administrator's instructions, if any.
Table 7: Setting an IP Address
5
Click [OK]. The [Local Area Connection Properties] window appears again.
6
Click [OK]. When a message appears prompting you to restart the computer, click
[Yes].
37
Advertisement
Table of Contents
