Fujitsu s6110 User Manual page 138

Hide thumbs Also See for s6110:
Table of Contents

Advertisement

PS/2
An IBM series of personal computers which established a number of standards for connecting external
devices such as keyboards and monitors.
RAM
Random Access Memory. A hardware component of your notebook that holds binary information
(both program and data) as long as it has the proper power applied to it.
RAM Module
A printed circuit card with memory and associated circuitry which allows the user to add additional
memory to the computer without special tools.
Reset
The act of reloading the operating system. A reset erases all information stored in RAM.
Restart
See Reset.
Resume
To proceed after interruption. In your notebook this refers to returning to active operation after having
been in one of the suspension states.
ROM
Read Only Memory. A form of memory in which information is stored by physically altering the
material. Data stored in this way can not be changed by your notebook and does not require power
to maintain it.
SSID
Service Set Identifier
Specifies which network you are joining. Some systems allow you to specify any SSID as an option
so you can join any network.
SDRAM
Synchronous Dynamic Random Access Memory.
Serial Port
A connection to another device through which data is transferred one bit at a time on a single wire
with any other wires only for control of the device not for transfer of data.
Shadow RAM
A technique of copying data or applications stored in ROM (Read Only Memory) into RAM (Random
Access Memory) for access during actual operation. RAM is much faster to access than ROM,
however ROM contents are not lost when power is removed. Shadowing allows permanently stored
information to be rapidly accessed.
123

Advertisement

Table of Contents
loading

Table of Contents