22
- 2-TRACK IN/OUT
Input
Use the Tape input if you wish to listen to your Mix from a Taper Recorder or DAT, You can assign the signal coming
form the Taper Recorder either to a pair of studio monitor using the Control Room assignment on the front panel or
you can also send the signal directly to the Main Mix.
Output
These 1/4" TRS sockets will route the main mix into a tape recorder.
- STEREO AUX RETURN
Use these stereo 1/4" phone socket to return the sound of an effect unit or sound processor to the Main Mix.
Alternatively you can use them as an extra auxiliary input.
- AUX SEND 1 and 2
These 1/4" phone sockets are used to send out the signal from the AUX Bus to external devices such as effects
and sound processors.
24
- PHONES
This socket will send out the signal mix to a pair of headphones.
STEREO AUX RETURN
AUX SEND
LEFT(MONO)
RIGHT
1
1
LEFT
RIGHT
2
2
21
22
23
23
2-TRACK IN/OUT
L
R
TAPE IN
TAPE OUT
PHONES
24
12
21