Table of Contents
Advertisement
13. TO REMOVE THE CAVITY LAMP
1) Remove the screws for the air grille and remove the air
grille.
2) Push the tab on cavity lamp bracket and lift the cavity
lamp bracket.
3) Remove the screw from the cavity lamp bracket.
14. TO REMOVE THE TRAY MOTOR
1) Remove three screws from the base plate and remove it.
2) Pull the connectors off the tray motor terminal.
3) Remove two screws from the tray motor and remove the
motor.
15. TO REMOVE THE HOOD LAMP SOCKET
1) Remove three screws from the base plate and remove it.
2) Remove the screw for the heat protector and remove it.
3) Pull the connectors off the hood lamp socket terminals.
4) Remove the screw for the hood lamp socket and remove
it.
DISASSEMBLY AND ASSEMBLY
17
Advertisement
Table of Contents
