Assembly - Kenmore 148.20125510 Use & Care Manual

Knob Light Wire
15
For the main knob light wire and side burner knob light wire, connect the joint together.
Side Shelf
16
Assemble the side shelf, side shelf right support, and side shelf bottom together on a flat surface. Use
two screws to attach the right support end with the hinge pin to the shelf as shown. Use two screws to
attach the bottom support to the other end of the right support. Insert the screws on the inside of the
support as shown. Use a Phillips screwdriver inserted through the holes on the outside of the support
to tighten the screws. After assembly, make sure the top surface of the right support is aligned with the
side shelf surface.
Side Shelf
Side Shelf Right Support
Side Shelf Bottom Support
Hinge Pin
Align the two surfaces
Side Shelf
Hinge Pin
Side Shelf Right Support
23
3/16-24 x 1/2"Screw
Qty. 4