Kenmore 148.20125510 Use & Care Manual page 26

Side Shelf Table
20
Connect the table legs to the table support with two 6x35 pin shafts, cotter pins and washers as shown.
Attach the table connecting rod to the side shelf table with one 6x43 pin shaft, pin and washer.
WARNING: To avoid injury, make sure that table legs are held up to prevent them from falling while
attaching table connecting rod and pin shaft.
Pin Shaft 6x35
Side Shelf Table
21
Unfold the table legs to the upright locked position. Insert the hole in the right corner of the side shelf
table onto the hinge pin of the side shelf right supoport. Attach the side shelf table to the side shelf
with 2 screws as shown.
Table Leg
Table connect rod
26
Pin Shaft 6x35
Qty. 2
Pin Shaft 6x43
Qty. 1
Pin
Qty. 3
Washer
Qty. 3
Pin Shaft 6x43
3/16-24 x 1/2"Screw
Qty. 2