Kenmore 148.20125510 Use & Care Manual page 34

SIDE TABLE LED LIGHT INSTRUCTIONS
The LED light neck is flexible and can be adjusted as
needed to light the cooking area of the grill. (Fig. 10)
When not using the LED light, it can be retracted and
hidden under the table. Follow the steps below:
1. Bend the LED light neck as shown, making sure the
neck is low enough to go through the opening when
rotating fixture down. Then push down on the right end
of the LED fixture as indicated in Fig. 11.
2. Rotate the LED light fixture 180 degrees clockwise
(see Fig. 12) until it stops with the bottom of the fixture
aligned with the surface of the side shelf (Fig. 13).
Make sure that the light does not interfere with the side
shelf during this process.
NOTE: To restore LED light to side shelf surface, push
down on left end of fixture and rotate counterclockwise.
LED Light
LED light neck
Fig. 10
Push down here
to restore
34
Push down here
to unlatch
Fig. 11
Fig. 12
Push down here
to latch
Fig. 13