devention scout x4 Quick Start Manual page 4

Power button__i
V
II
Ptwer Switc
-
I
.
Power indicator
04— Power
Switch
Bluetooth
Indicator light
..!1— (Green light)
vi
Touch GCS icon
Touch GO icon
Enter the main screen Red LED flashing till to go out
means the code binding finished.
Flight Assistant
0
,\
4.1.6 Touch GCS icon at middle of the mibile screen, GCS software will search automatically and display matched bluetooth, then select the matched
bluetooth and touch GO icon or back to enter into main interface(Skid landing comes back automatically)
Touch GCS icon Touch GO icon Enter the main screen
Red LED flashing till to go out After the successful binding place
means the code binding finished. the aircraft on a stable surface.
4.2 Skid landing unassembled(assemle skid landing/code binding)
Skid landing
1111.1.1117%:~01 ,
Skid landing
Skid landing
module A module B
....
11,
4.2.1 Prepare two skid landing, 4.2.2 Put the skid landing into 4.2.3 Install the skid landing 4.2.4 Skid landing installation
skid landing module A/B, 4pcs the skid landing position. module, and screw down the finished.
M2.5X20 screws. M2.5X20 screw to fix skid landing.
h
4.2.5 Put the aircraft on the
horizontal position, slide the
power-switch to the ON position,
then press on the power button for
about 3-5 seconds, until the green
power indicator lights solid.
4.2.6 Turn on the power switch
(to position ON) of 2.4G Bluetooth
Datalink. The green light of bluetooth
will flash quickly, waiting for the connection
with the phone bluetooth.
4.2.7 Enter phone settings and open the bluetooth function. In the bluetooth search list find and touch "waikera-****", input password 1234 to connect
and the connection will be successful if it displays "connected". Exit the settings when finished.
4.2.8 Touch GCS icon at middle of the mibile screen, GCS software will search automatically and display matched bluetooth, then select the matched
bluetooth and touch GO icon or back to enter into main interface.
• 2 •