devention scout x4 Quick Start Manual page 15

14.6 LED Indicator descriptions
LED status Status instructions
The Air
end
The Air end and Ground end is receiving/sending dates Green LED flashes quickly
The Air end and Ground end is not receiving/sending dates
Green LED keeps solid
The Air end and Flight control end is receiving/sending dates Blue LED flashes quickly
The Air end and Flight control end is not receiving/
sending dates
Blue LED keeps solid
The Air end and Ground end lost signal
Green and Blue LED
flashes slowly
The
Ground
end
Normal power voltage
Onkeeps
solid of Power LED
Power voltage is less than 3.3V Red blinks of Power LED
The Ground end is receiving Ground Station dates Green flashes quickly of COM-TX LED
The Ground end is not receiving Ground Station dates
eirp
keeps solid of COM-TX LED
The Ground end is sending dates to Ground Station Blue flashes quickly of COM-RX LED
The Ground end is not sending dates to Ground Station Blue keeps solid of COM-RX LED
The Ground end is receiving Flight Control end datas
White flashes quickly of RF-RX LED
The Ground end is not receiving Flight Control end dates 1Whitel keeps solid of[RF-RX LEDI
Yellow flashes quickly of RF-TX LED
The Ground end is sending datas to Flight Control end
Yellow keeps solid of RE-TX LED
The Ground end is not sending dates to Flight Control end
The Ground end lost contact with the Air end
1Whitel and Yellow flashes slowly of RF
Bluebooth unconnnect
Green LED flashes quickly of Bluetooth
Bluebooth connnected Green LED flashes slowly of Bluetooth
On charging Red LED keeps solid of[i]EM
Charge finished I normal situation
Red LED out of Charge
• 13 •