Devices That Support Ground Station: Android And Apple Phone; Download And Install Software; Installing The Propellers; Restore Or Assemble The Skid Landing/Binding The Radio - devention scout x4 Quick Start Manual

4
A
M3
M2
1.0 Devices that support Ground Station: Android and Apple phone
Android phone requirements:
(1) The Android version should be 4.0 or above, the screen resolution should be 480 x 800 pixels or above.
(2) Google play, google play store and TTS firmwares should be preinstalled in the phone.
2.0 Download and install software
(1) Please download the "GCS Ground Station" software from walkera official web (www.walkera.com) / Google for Android version 4.0 above.
(2) Apple IOS system, Please download the "GCS Ground Station" software from APP Store.
Suggestion: please set the phone to flight mode when you are using the GCS firmware to control the flight.
3.0 Installing the Propellers
r% •
Q •
3.1 Prepare forward propeller
(Clockwise arrow mark), counter
propeller (counterclockwise
arrow mark )
3.2 Match the arrows on the
propellers to the arrows on the
arm next to each motor. Screw
each propeller onto the motor,
secure by hand, no need for tools.
3.3 Prepellers assembled
(assembled skid landing)
3.4 Prepellers assembled
(unassemble skid landing)
4.0 Restore or assemble the skid landing/binding the radio
4.1
Skid landing assembled(restoration/code binding)
The Landing gear is shipped in the retracted position. DO NOT try to extend the landing gear by pulling on it.
We will deploy the landing-gear the first time the system is powered, please follow these instructions carefully.
Powir indicator
I ; ;
Power switch
—
nib/Fr button
Cr— Power
Switch
Vj
Bluetooth
indicator light
, ..:4--(Green light)
4.1.1 Install the fully charged
battery DO NOT turn on the
battery until later.
*Please check the charger
manual for charging instructions
4.1.2 Turn X4 on its back. The
belly and the retractable legs
should now be facing up.
MAKE SURE nothing is blocking
the legs.
4.1.3 Turn the power switch to
"ON" position, and press on the
power button about 3-5 second
till the Green power indicator solid.
4.1.4 Turn on the power switch
(to position ON) of 2.4G Bluetooth
Datalink. The green light of
bluetooth will flash quickly,
waiting for the connection with
the phone bluetooth.
4.1.5 Enter phone settings and open the bluetooth function. In the bluetooth search list find and touch "walkera-****", input password 1234 to connect
and the connection will be successful if it displays "connected". Exit the settings when finished.
• 1 •