JVC MX-DVA5 Service Manual page 13

Removing the CD/ DVD mechanism
holder assembly (mechanism included)
1. Disconnect the card wire from connector CN5 on the
motor board in the CD mechanism holder assembly
on the under side of the CD changer unit.
2. Remove the screw E attaching the shaft on the right
side of the CD mechanism holder assembly.
3. Pull outward the stopper fixing the shaft on the left
side and remove the CD/ DVD mechanism holder
assembly from behind in the direction of the arrow
4. Pull out the CD/ DVD mechanism holder assembly.
CD/ DVD mechanism holder assembly
Fig.12
(See Fig.11 to 13)
.
CD/ DVD changer unit
D
SCW1
Fig.10
CD/ DVD mechanism
CN5
Motor board
Stopper
Fig.11
CD/ DVD mechanism holder assembly
Fig.13
MX-DVA5
CD/ DVD servo board
holder assembly
E
1-13