Table of Contents
Advertisement
CC220R
- To change the status, press Edit
11.2. M
ODIFYING THE REMOTE ACCESS CODE
The remote access code enables you to listen to the messages left on your answering
machine via another telephone.
•
Go to ANS. MACH / SETTINGS / REMOTE CODE.
•
Press Yes
A base code entry screen is displayed.
•
Enter your Base code (default setting is 0000). Press OK.
•
Enter the new remote access code (4 digits mandatory). Press OK.
11.3. S
ETTING THE MESSAGE DURATION
This duration corresponds to the recording time that the caller will have to leave you his
message.
•
Go to ANS. MACH / SETTINGS / MESS. DURATION.
•
A screen indicating the maximum authorised recording time for each message
appears.
- To keep the current duration, press Valid.
- To modify the current duration, press Edit
During a change, a list of message durations is displayed on the screen. Select the
desired duration using
11.4. P
RIVILEGED ACCESS
This service enables you to switch off the handset ringer for all incoming calls when you do not
want to be disturbed, except for privileged calls.
During the reception of a call, the answering machine will switch on after a certain number of
(muted) rings that you will have set and the caller will be able to leave you a message.
You can programme your telephone in such a way that it will only ring when specific callers
call. To achieve this, they will need to dial
the outgoing message. Once the code has been entered, your telephone rings.
•
Go to ANS. MACH / SETTINGS / PRIV. ACCESS.
•
The following information is displayed on the screen:
- The privileged access code.
- The service status.
•
Press Edit
•
Press Yes
Inform your privileged contacts of this code. When they call you, they will dial
the privileged code preceded by the
to change the access code.
or
. Press OK.
(star) key and a privileged code when they hear
to modify the information displayed on the screen.
to activate the privileged access mode.
34
.
.
.
(star) key while listening to the OGM.
Advertisement
Table of Contents
