Phone Use; Telephoning - SAGEMCOM CC220R User Manual

CC220R
4. P
HONE USE
4.1. T
ELEPHONING
4.1.1. R
When the phone rings, lift the handset from its base and use it just like a standard telephone.
• When a call is received, the phone rings.
• The line indicator
screen if you have subscribed to the "caller ID" service.
The caller's name may also be displayed if it is included in your phone book.
Accepting a call in handset mode
• Pick up the phone handset. The line indicator
displayed on the screen.
• To end the call, hang up the handset.
Take a call in speakerphone mode
Press
The symbol and the call time counter are displayed on the screen.
• To end the call, press
Toggle between handset mode and speakerphone mode
• If you are in handset mode, press and hold the
handset to toggle to speakerphone mode. Press the
call.
• If you are in speakerphone mode:
- If the handset is hung up on the base, lift the phone handset to toggle to handset
mode.
- If the handset is not hung up on the base, press the dial tone button
toggle to handset mode.
• To end the call, hang up the handset on the base or press
Use the
volume.
The handset earphone volume or speakerphone volume can vary from 1
to 5.
4.1.2. M
The call can be made in two ways:
• Making a call in handset mode
Pick up the handset.
The line indicator
The call time counter is displayed on the screen.
• To end the call, hang up the handset on the base or press
ECEIVING A CALL
flashes and the caller's phone number is displayed on the
to speak in speakerphone mode (without holding the handset).
again.
and keys to vary the earphone volume or speakerphone
AKING A CALL
comes on in red. Dial your number on the keypad.
turns red and the call time counter is
16
key and then hang up the
key again to end the
.
.
to