Front Panel - JBL KX200 Owner's Manual

Section 2
4
Getting Started

2.2 Front Panel

MIC A: Microphone Inputs gain control
1.
Separate gain trim controls are provided for above each input on the rear panel.
MIC B: 1/4" Microphone Input
2.
Use this microphone input when connecting microphones via a 1/4" connection.
Separate gain trim control is provided above the input.
Display
3.
This LCD display shows which menu you have navigated to and which parameters are
available for editing.
Adjust/Select Knob
4.
This dual function encoder allows you to load presets, navigate within menus, and
edit processing parameters.
FUNCTION SELECT
5.
These buttons allow you to navigate through the different menus within the KX200.
Here's a brief description of these buttons:
• ESC –A short press will navigate up one level within the current menu. If pressed
and held for 2 seconds, this button will completely exit the current menu and return
you to the home screen.
• SAVE - This button is used to initiate the storing of a preset.
• MIC – Enters the microphone menu
• ECHO –Enters the ECHO menu
• REVB –Enters the REVB menu
• MUSIC –Enters the MUSIC menu
• SYS –Enters the system menu
• SURROUND – Enters the surround outputs menu
• MAIN – Enters the main outputs menu
• SUB – Enters the subwoofer output menu
• CENTER – Enters the center output menu
VOLUME CONTROL
6.
These knobs allow quick access for adjusting the mix between the music level, overall
microphone level, and echo/reverb effect level.
Power Switch
7.
Use this switch to turn the power of the KX200 on and off.
KX200