Factory Mode - Philips 150B1C/00 Servise Manual

Factory Mode Adjustment
Entering Factory Adjustment Menu
-Turn off monitor(do'nt turn off PC)
- Push & and "
control panel ,then press
mode as shown below.
POTOMAC2 V0.10 2000-02-23
Use button to select factory adjustment indication (for example:
POTPMAC2 V0.10 2000-02-23), which is the entrance of the factory
adjustment menu, press
as below.
POTOMAC2 POTOMAC2
-
AUTO AUTO SUB SUB
9300K 9300K R R
6500K 6500K R R
OFFSET OFFSET R R
GAIN GAIN R R
Use or buttons to select SUB-CON, 9300K R G B,..etc.
Use or buttons to decrease/increase the value of each item
: adjust Sub-brightness & Sub-contrast automatically.
AUTO AUTO
-
POTOMAC2 POTOMAC2
AUTO AUTO SUB SUB
9300K 9300K R R 205 G G
6500K 6500K R R G G
255
OFFSET R OFFSET R G G
22
GAIN GAIN R 128 R 128
Back

Factory Mode

" buttons simultaneously on the front
button to bring up OSD menu of factory
button to access it. The window shows
V0.10 V0.10 2000-02-23 2000-02-23
-
OK
SUB SUB CON CON
G G B B
G G B B
G G B B
G G B B
V0.10 V0.10 2000-02-23 2000-02-23
-
SUB SUB CON CON
OK
255
233 B B
255 B B 149
20 B B
20
G 128 G 128 B 128 B 128
Contrast adjustment (Sub-Contrast). Use this menu item to
adjust the contrast gain of pre-amp ranges from 0 to 255.
9 3 0 0 K R G B
6 5 0 0 K R G B
Color temperature gain adjustment. Use these menu items
to adjust the RGB gains of pre-amp for different color
temperatures, ranges from 0 to 255.
OFFSET R G B
Select AUTO SUB to get the optimal value of SUB-CON and
OFFSET (based on the 64 level gray scale signal).
GAIN R G B (Ignore)
166
23
150B LCD
Go to cover page
Forward