Control Panel Setup - Miditech audiolink pro Owner's Manual

AudioLink Pro series driver directory.
4. Copy asio2ks.cpl into your System32 folder.
5. Go to Control Panel, double-click ASIO2KS and make your settings.
8. Your Miditech Audiolink Pro is now ready to use.

Control Panel Setup

Once setup is complete, you can control most aspects of the Audiolink Pro using its control
panel.To launch the control panel in your operating system, check the following instructions:
The control panel has the following sets of controls:
Configuration:
Device: Please chose the Audiolink Pro USB audio device.
Output: the 2 channel output of Audiolink Pro.
Format: you can set your Audiolink Pro playback sampling rate from 16bit/44.1kHz~24bit/96kHz.
Input: the 2 channel input of Audiolink Pro.
Format: you can set your Audiolink Pro input sampling rate from 16bit/44.1kHz~24bit/96kHz.
Latency setting: shorter latency time will require more CPU resources, 4~11msec for an average
PC. If you hear interference noise such as a "POP...", increase latency to higher setting such as
8~20msec.
References to the driver attitude under Windows audio sequencer programs such as Cubase,
sonar or Samplitude:
5