Danfoss HC6000 User Instructions page 6

Setting the time and temperatures events for
GB
Days 1-5.
1. Press + or – buttons to adjust event time for
event 1.
2. Press PROG to advance to temperature
setting.
3. Press
temperature.
4. Press + or – button to select required cooling temperature.
OPTIONAL: If heating is not required, "Off " can be selected below 5°C.
If cooling is not required, "Off " can be selected above 37°C.
Press PROG button to move onto event 2 programming and
repeat the steps above:
1. Press + or – buttons to adjust event time for
event 2.
2. Press PROG to advance to temperature
setting.
3. Press
temperature.
4. Press + or – button to select required cooling temperature.
OPTIONAL: If heating is not required, "Off " can be selected below 5°C.
If cooling is not required, "Off " can be selected above 37°C.
Press PROG button to move onto event 3 and repeat steps 1 - 4
for events 3 and 4.
6
or buttons to adjust heating
or buttons to adjust heating
+ -
or
+ -
or