Danfoss HC6000 User Instructions page 11

Displaying Room temperature
GB
To enter thermometer mode to display current
room temperature press both SELECT and
buttons and hold for 2 seconds. To return to
time display repeat press and hold operation.
The unit will revert to time display after Programming or
Advanced Programming Mode has been entered.
Whilst in thermometer mode if the display
fl ashes a row of bars the measured temperature
exceeds the display limit.
Selecting fan speed setting
Use slider switch to select required fan speed.
Resetting the thermostat memory
Return the thermostat to factory settings
This should only be carried out should the performance of
the thermostat become erratic, this is only likely to happen
as a result of severe electro-magnetic interference such as a
lightening storm.
To reset clock and re-start the thermostats micro-processor
press the RESET button. After doing this the thermostat must
be re-programmed.
11