Needle In Needle Hole Center (Only On Pfaff 1053 And 1183) - Pfaff 1051 Instruction Manual

11. Needle in needle hole center
05.09
11 - 11
Requirement
The needle must penetrate the needle hole exactly in the middle.
Fig. 11 - 10
Set the needle in the needle hole.
Loosen screws 1, 2 and 3.
Move the needle bar frame 4 according to the requirement.
Tighten screw 2 and turn screw 3 slightly.
Via screw 1, bring the retracted guide bolt to the eye of the needle bar frame 4 and
tighten it.
Turn the handwheel a few times to prevent distortion to the needle bar frame 4.
Tighten screw 3.
(only on PFAFF 1053 and 1183)
4
Adjustment
1
3
2