Cutting Motion - Pfaff 1051 Instruction Manual

11

Cutting motion

.06.02
11 - 25
Requirement
With the edge trimmer switched on and the needle bar at its t.d.c. on the PFAFF 1053 and
1183, or at its b.d.c. on the PFAFF 1051 and 1181, the knife should be at the top of its
stroke.
Fig. 11 - 24
Switch on the edge trimmer and bring the needle bar to t.d.c. or b.d.c. (see requirement).
Turn eccentric 1 (two screws 2) according to the requirement
2
1
requirement. requirement requirement requirement
Adjustment
requirement). requirement). requirement). requirement).