D-Link DSL-G604T User Manual page 36

Wireless LAN operation must be enabled before any settings can be configured. To enable Wireless LAN
function, click the Enable Wireless LAN option box to select it. If you do not want to enable the Wireless LAN
connection now, leave the box empty and click Next to continue to the final step of the Setup Wizard. If you
enable Wireless LAN now, configure the wireless settings in the next step. Click Next to continue.
DSL-G604T Wireless A DSL Router User's Guide
Check this box to enable
wireless access to the
Router.
Configure the SSID and Channel according
to the requirements of your network. The
default settings use an Open System for
wireless Authentication
disabled. Open System Authentication to
allow any wireless station to associate with
the access point. You can accept the default
settings and click Next to proceed to the final
step. Wireless
configured at any time using the Wireless
menu in the Home directory.
If you choose to change the Authentication to
Shared key, WPA or WPA-PSK; or if you
enable WEP using the Setup Wizard, the
dialog box will present a
configuring these options.
Select Shared key to only allow stations
using a shared key encryption to associate
with it. The shared key is configured the same
way WEP keys are configured. See below for
a description.
24
and WEP is
LAN security can be
menu for