P49 Specifications; P349 Specifications - Arcam FMJ C49 Handbook

Continuous power output (20Hz—20kHz at 0.2% THD), per channel
Both channels, 8Ω, 20Hz—20kHz
Single channel, 4Ω, at 1kHz
P49
Harmonic distortion, 80% power, 8Ω at 1kHz
specifications Inputs
PWR IN input:
Nominal sensitivity for 200W / 8Ω
Input impedance
Frequency response
Signal/noise ratio (Awtd) ref 50W / 8Ω
General
Mains voltage
Power consumption (maximum)
Dimensions W x D x H (including feet)
Weight (net)
Weight (packed)
Supplied accessories
E&OE
NOTE: All specification values are typical unless otherwise stated.
200W
400W
0.001%
RCA type XLR type
1.15V 2.3V
10kΩ 10kΩ
20Hz—20kHz ± 0.05dB
110dB
110–120V~ or 220–240V~
1kW
433 x 425 x 171mm
18.0kg
19.7kg
Mains lead
Continual improvement policy
Arcam has a policy of continual improvement for its
products. This means that designs and specifications
are subject to change without notice.
E-22
Continuous power output (20Hz—20kHz at 0.2% THD), per channel
Three channels, 8Ω, 20Hz—20kHz
Two channels, 8Ω, 20Hz—20kHz
P349
Single channel, 8Ω, at 1kHz
Single channel, 4Ω, at 1kHz
specifications
Harmonic distortion, 80% power, 8Ω at 1kHz
Inputs
PWR IN input:
Nominal sensitivity for 200W / 8Ω
Input impedance
Frequency response
Signal/noise ratio (Awtd) ref 50W / 8Ω
General
Mains voltage
Power consumption (maximum)
Dimensions W x D x H (including feet)
Weight (net)
Weight (packed)
Supplied accessories
E&OE
NOTE: All specification values are typical unless otherwise stated.
180W
200W
220W
400W
0.001%
RCA type XLR type
1.15V 2.3V
10kΩ 10kΩ
20Hz—20kHz ± 0.05dB
110dB
110–120V~ or 220–240V~
1kW
433 x 425 x 171mm
18.0kg
19.7kg
Mains lead
Continual improvement policy
Arcam has a policy of continual improvement for its
products. This means that designs and specifications
are subject to change without notice.
E-23