Nikon LS8000 User Manual page 27

Installing the IEEE 1394 Update for Windows 98 Second Edition
This section describes how to install the IEEE 1394 update required when using the scanner
under Windows 98 Second Edition (SE).
1
Turn on your computer and insert the Nikon Scan 3.1 CD in the CD-ROM drive.
The Welcome Window
If the installer starts automatically when you insert the Nikon Scan 3.1 CD into the CD-ROM
drive, click Exit to close the Welcome window.
2
Double click on the My Computer icon and open the CD-ROM drive.
3
Next click on the Nikon Scan 3.1 CD with the right mouse button and select Explore.
When the Microsoft directory opens, double click the 242975USA8(.EXE) file.
4
When the dialog shown at right is dis-
played, remove the CD from the CD-
ROM drive and then click Yes to restart
your computer.
5
Once the computer has restarted, check
that the drivers for the interface board
have been installed and are function-
ing normally. Click on the My Computer
icon with the right mouse button and
select Properties from the menu that
appears.
6
In the System Properties window, click
the Device Manager tab. Check that
"NEC Firewarden OHCI Compliant IEEE
1394 Host Controller" appears in the
Device Manager under "1394 Bus Con-
troller."
17