Chopping Process; Shredding And Slicing Process; Kneading Process/Whisking Process; Blending Process/Citrus Pressing Process/Juice Extracting Process - Philips HR 7754/01 Service Manual

PROCESSES HR 7754/01
SMART SMART
CONTROL CONTROL
SMART SMART
CONTROL CONTROL
SMART SMART
CONTROL CONTROL
SMART SMART
CONTROL CONTROL
SMART SMART
CONTROL CONTROL
SMART SMART
CONTROL CONTROL
SMART SMART
CONTROL CONTROL

Chopping process

The chopping process starts with four pulses. After that, the food processor will pick up speed until it
runs at maximum power. He will continue to run at this speed until the STOP button is pressed.
The speed can be decreased in three steps by pressing the - button.

Shredding and slicing process

When the shredding and slicing button is pressed, the food processor will start to run at a constant
speed to produce the best end results with the adjustable slicing disc or the inserts.
The food processor will continue to run at this constant speed until the STOP button is pressed.
The speed can be increased or decreased in three steps by pressing the + button or - button.
Kneading process
The kneading process starts with a Soft Start and then increases to a powerful kneading speed to
achieve a good end result in a short time. The food processor will continue to run at this speed until
the STOP button is pressed. The speed can be decreased in three steps by pressing the - button.
Whisking process
When the whisking process is selected the appliance starts with a 10 second Soft Start. The
speed will gradually increase until the maximum working speed for perfectly whisked egg whites or
whipped cream has been reached. The speed is maintained until the STOP button is pressed.
The speed can be decreased in three steps by pressing the - button.
Blending process
To prevent splashing, the blending process features a Soft Start.After a few seconds the speed
gradually increases to maximum speed to produce a perfectly smooth result. The blender will
continue to run at this speed until the STOP button is pressed. During the biending process the
speed can be decreased in three steps by pressing the -button.
Citrus pressing process
The citrus pressing process features a Soft Start, which means the cone starts rotating at a low
speed guaranteeing a pieasant sensation and a perfect result. The food processor will continue to
run at this speed until the STOP button is pressed. The speed can be decreased in three steps by
pressing the -button.
Juice extracting process
The juice extracting process has a Soft Start, which means that the juice extractor will start to run
at a low speed and gradually increase to maximum speed to guarantee the highest possible, juice
output. The food processor will continue to run at this speed until the STOP button is pressed.
The speed can be decreased in three steps by pressing the -button.