Connecting To The Mains Power Supply - Samsung NZ84J9770EK User & Installation Manual

Installing the hob

Connecting to the mains power supply

Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated
on the rating plate, corresponds to the available supply voltage. The rating plate is located on
the lower casing of the hob.
WARNING
Shut off power to circuit before connecting
wires to circuit.
The heating element voltage is AC 230 V ~ .
The appliance also works perfectly on
networks with AC 220 V ~ or AC 240 V ~ .
The hob is to be connected to the mains
using a device that allows the appliance to
be disconnected from the mains at all poles
with a contact opening width of at least
3 mm, eg. automatic line protecting cut -
out, earth leakage trips or fuse.
WARNING
The cable connections must be made
in accordance with regulations and the
terminal screws tightened securely.
WARNING
Once the hob is connected to the mains
supply, check that all cooking zones are
ready for use by briefly switching each on
in turn at the maximum setting with suitable
cookware.
12 English
NZ84J9770EK_EU_DG68-00630A-01_EN.indd 12
WARNING
Pay attention (conformity) to phase and
neutral allocation of house connection and
appliance (connection schemes); otherwise,
components can be damaged.
Warranty does not cover damage resulting
from improper installation.
WARNING
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
2015-02-05 6:16:04