Change A Qos Rule Or Change The Priority For A Rule - NETGEAR D7000 User Manual

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
The following figure shows only part of the QoS Setup page.
6. Either select the radio button for a device in the MAC Device List to complete the fields automatically (by default,
each device is assigned a normal priority) or specify the settings for the device as described in the following
table.
Field
QoS Policy for
MAC Address
Device
Priority
7. Click the Add button.
The new QoS rule is added to the QoS rules table.
8. Click the Apply button.
Your settings are saved.

Change a QoS Rule or Change the Priority for a Rule

You can change an existing default or custom QoS rule. For default rules, you can change only the priority. For
custom rules, you can change the priority and other settings.
To change a QoS rule:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
Description
Enter a name for the QoS rule.
Enter the MAC address for the device.
Enter the name of the device.
Select the priority (Highest, High, Normal, or Low) that must be assigned to the service or
application.
The priority selections correspond to the queue columns in the QoS rules table.
Optimize Performance
149