Use Wps With The Pin Method - NETGEAR D7000 User Manual

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
4. Select ADVANCED > WPS Wizard.
The page displays a description of the WPS method.
5. Click the Next button.
By default, the Push Button (recommended) radio button is selected.
6.
Either click the button onscreen or press the WPS button on the right side panel of the modem router.
For two minutes, the modem router attempts to find the WiFi device (that is, the client) that you want to join the
modem router's main WiFi network.
During this time, the WiFi LED on the top panel of the modem router blinks white.
7. Within two minutes, go to the WiFi device and press its WPS button to join the modem router's main WiFi network
without entering a password.
After the modem router establishes a WPS connection, the WiFi LED lights solid white and the Add WPS Client
page displays a confirmation message.
8. To verify that the WiFi device is connected to the modem router's main WiFi network, select BASIC > Attached
Device.
The WiFi device displays onscreen.

Use WPS With the PIN Method

To use the PIN method to connect a WiFi device to the modem router's WiFi network, you must know the PIN of
the WiFi device that you are trying to connect.
To let a WiFi device join the modem router's WiFi network using WPS with the PIN method:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
Manage the WiFi Network Settings
106