Table of Contents
Advertisement
If you cannot log in to the modem or your browser does not display the Dashboard page, check the following:
•
Make sure that the computer, router, or WiFi router is connected to the yellow LAN Gigabit Ethernet port of
the modem.
•
Make sure that your browser does not cache the previous page by closing and reopening the browser.
•
If your computer is set to a static or fixed IP address (this type of setting is uncommon), change the setting
to obtain an IP address automatically from the modem (see
For more troubleshooting information, see
Change the Language
You can change the language of the modem's web pages.
To change the language:
1.
Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client from a router that is
connected to the modem.
2.
In the address field of your browser, enter http://192.168.5.1.
The limited Dashboard page displays.
3.
If you did not select the Remember me check box when you logged in previously, enter the modem
password in the Sign In field.
See the modem label for the default password.
4.
Click the Sign In button.
The full Dashboard page displays.
5.
Select Settings.
The page displays the general settings.
6.
In the Language section, from the Default Language menu, select a language.
The Submit button displays after you select the language.
7.
Click the Submit button.
Your settings are saved and the language changes.
Manage Automatic Failover Detection
The modem provides wireline broadband pass-through with automatic failover support so that you can
connect the modem to an existing DSL, cable, or fiber optics modem (see
Broadband Modem
on page 16). If the wireline broadband connection goes down, the modem can
automatically and seamlessly switch over to the backup Internet connection over the mobile broadband
network for continuous connectivity. This capability is enabled by default. You can manage the IP addresses
that are used in failover detection.
LTE Modem Model LB2120
Change the LAN Settings
You Cannot Log In to the Modem
Get Started
20
on page 24).
on page 89.
Connect the Modem to a Wireline
Advertisement
Table of Contents
