Advertisement
Initial Camera Settings
-
Set Date and Time.
-
Move Mode Switch to "camera icon" setting and use "P" Program mode.
-
Set White Balance to auto "AWB."
-
Set Light Metering to "Center Weighted Avg."
-
Set ISO to 100.
-
Set Flash to "On
-
Set Review to "5 Seconds."
-
Set AF-assist beam to "Off."
-
In the Flash Settings menu, Set Red-Eye Correction and Red-Eye Lamp
to "Off."
-
Set AF Frame to "Center" and Servo AF to "Off."
-
Set AF-Point Zoom to "Off."
A strobe focusing light is recommended to assist AF underwater.
Note: Enable Macro
overexposure occurs, back away from the subject and zoom in.
External Accessory Lenses
An external wide angle conversion lens increases angle of coverage so
you can get much closer to your subject while still fitting everything in the
frame. By reducing the amount of water between the subject and your
camera lens, the resulting image will be more crisp and colorful.
- Attach 46mm threaded #6420.46 Ikelite W-20 and other lenses directly
to the front of the port.
- Attach 67mm threaded #6420 Ikelite W-20, Inon Type II and Epoque
lenses using the #9306.81 port adapter. This adapter may also be used
to attach 67mm threaded macro lenses.
- Attach bayonet style Inon macro or UWL-100 28AD, UWL-105AD and
UFL-165AD wide angle or macro lenses using the #9306.79 port adapter.
Moderate to extreme vignetting (shading in the corners) will be present in
the widest setting when using an external accessory lens. This effect can
be eliminated by zooming in slightly.
flash always fires" Lightning Bolt."
mode when shooting close-up subjects. If
3
Advertisement
