Using Advanced Functions - Samsung AP30M1 Series User & Installation Manual

Using advanced functions

Using the Turbo function
Turbo function will be helpful to cool or heat your room quickly and effectively by operating at the maximum fan speed for
30 minutes.
1. Turn on the air conditioner.
Press the Power button on the remote controller.
2. Set the operation mode.
Press the Turbo/Long button on the remote controller once. Turbo
indicator will appear on the remote controller display.
The air conditioner operates in High fan speed and automatically
adjusts the temperature according to the current room temperature.
The unit operates for 30 minutes and then operates in last used
mode or in Auto mode if Dry/Fan mode is most recent mode used.
• Turbo function is only available in Auto/Cool/Heat* mode.
(*Heat mode is applicable for AP30M1✴ model only.)
NOTE
If Turbo function is selected in Dry/Fan mode, operation mode changes to Auto.
• You cannot use Turbo and Long function at the same time.
To deactivate Turbo function
1. Press the Turbo/Long button on the remote controller twice while Turbo function is on.
The air conditioner operates in last used mode or in Auto mode if Dry/Fan mode is most recent mode used.
• While you are using the remote controller, make sure corresponding indicator appears on the remote controller
display.
NOTE
• Temperature/Fan speed cannot be adjusted while using this function.
• Air flow can be adjusted manually (see page 20 for instructions).
• If you press the Mode button while the Turbo function is on, it will cancel the function.
Mirage_AP30M0@_IBIM_E_34518A(1).indd 17
17
2012-02-01 오후 4:07:21